Home » clone » Recent Articles:

Using Corel PhotoPaint’s Clone Tool Part 2

November 21, 2009 CorelDraw, CorelDraw Help 1 Comment
thumbnail-1166
Using Corel PhotoPaints Clone Tool Part 2
By Mike Clarke
May 27, 2003, 00:12		 Email this article
Printer friendly page

Now it is time to click in another area to repair that area. If you look you have two points on the cursor – a “+” sign and an “o”. The plus sign is where you are sampling and the “o” is where the sample is being placed. … Continue Reading

Using Corel PhotoPaint’s Clone Tool Part 1

November 21, 2009 Corel and Sublimation, CorelDraw, CorelDraw Help No Comments
thumbnail-1156
Using Corel PhotoPaints Clone Tool Part 1
By Mike Clarke
May 26, 2003, 23:26		 Email this article
Printer friendly page

Problem: When working with photographs occasionally you are presented with a photograph that is contaminated with finger prints, has ripped edges or creases. Sublimating this image is not a good idea as the final image is only going to look as bad as the original.

Solution: The best way to fix up these imperfections is with the clone tool that is provided in Corel PhotoPaint. … Continue Reading

Google Translate

    Translate from:

    Translate to:

    Powered by Google Translate.

Help Us Out By Clicking on These Ads

Mike Clarkes Tweets

  • and you will see pretty good depth there but it depends on the tile 3 weeks ago
  • depends on the tile but be prepared if it is not the right tile. If you go to the office you can see my lion tile 3 weeks ago
  • I have a customer requested engraving on a tile that can reach a depth of 4 mm or a little more, what is the best way to do it on my machine 3 weeks ago
  • You should be able to do this just make sure that they are flat 2 months ago
  • Hi Mike, Do you have an idea how would it look like to engrave on cotton hoodies? 2 months ago

Videos, Slideshows and Podcasts by Cincopa Wordpress Plugin