MTM Marketing Videos

Creating A Music Box Part 1

In this Video we will be looking at how to create a music box that is available from the Epilog Laser website. This is a 5 part series on how to make this box. Click on this link Epilog Laser music box

Prepping a Logo in CorelDraw for the Laser Machine

This was a logo that was given to me by one of my customers who needed to engrave it on his laser. The logo was mostly dark colours which meant that when we lasered engraved the logo it would have been to dark for us to see. The logo was vectored so it was easy to ungroup it and than …

Creating an 11 Inch Dial in CorelDraw

In this tutorial I show you how to create a Dial in CorelDraw. This dial consists of gradients every 10 degrees. Along with the gradients each one is marked with a degree that has to every 10 degree. This was a project a dealer was given by their customer. Creating a dial in CorelDraw is very easy and this tutorial …

Creating a Mural in CorelDraw for 12 by 12 inch Mirror Tiles

In this post we create a mural for a 12 by 12 inch set of mirror tiles. Although it is not a common technique that you need to know in CorelDraw sometimes a customer may require a big mural done of an image or a photograph that is larger than your bed on your laser or sublimation printer. Thus to …

Using Laser Foil With CorelDraw and Your Laser

One of the better ways to upgrade the look of you award plaque or functional award such as a wood clock is decorating it with gold or silver laser foil. This is easy with CorelDraw and your Laser. These products look nice lasered engraved but when you want to introduce a real pop to a product than laser foil is …

Laser Engraving Encore White on Red Plastic

A lot of people have problems with plastics that either have a red or blue top on white or vice versa a white top and either a red or white core. The problem that people have is typically a contamination of the the colour that invades the white and discolours the white. In some of the earlier days of laser …

Thermark (Cermark) Spray for Laser Engraving

One of the biggest limitations of working with a C02 laser is that you can not engrave bare steel, chrome, brass or aluminum. Typically the laser beam just bounces off the material and leaves no mark. I few companies tried to fool us into thinking that a better set of optics would change this but all they did was heat …